Hubba Hubba™ 1-Person Backpacking Tent
Redesigned and lighter than ever, the 3-season Hubba Hubba backpacking tent is a best seller for a reason. This solo shelter is the perfect balance of weight, comfort and livability.
The Inside: The true rectangular floor (no foot taper) is large enough for all your gear, and 37 inches (0.94 m) of headroom lets you sit up comfortably. The tent body is a blend of mesh and solid fabric that provides airflow, privacy and weather protection. The no-curve tent door features zippers that are easy to use with one hand. It also zips closed to a single point so you always know where to open the door, even in the dark. New tech-friendly pockets feature cable ports at the corners for headphone and charging cords. Overhead gear loft pockets are perfect for headlamps, sunglasses and other quick-access items.
The Outside: The symmetrical tent design means you can set up the Hubba in a flash, particularly useful in those unexpected rainstorms. Virtually unbreakable Easton® Syclone™ poles, a DuraShield™ waterproof coating and taped seams keep the Hubba stable and dry so you can ride out the weather in comfort. The rainfly features a large vestibule for storing any gear you don’t want inside. The easy in-and-out vestibule door has a StayDry™ rain gutter to keep running water off you and your gear, and a kickstand vent maximize airflow.
The Bottom Line: The Hubba Hubba 1 will be the only tent you want on all your solo 3-season backpacking adventures thanks to its legendary lightweight livability.
- Lightweight: Minimum weight is 2 lbs. 2 oz (0.95 kg)
- Maximum Space: True rectangular floorplan and exceptional headroom (37 in/0.94 m); large side-entry vestibule to store gear
- Waterproof: DuraShield™ fabric coating and taped seams keep the elements outside where they belong
- Easton® Syclone™ Poles: Advanced aerospace composite materials make poles virtually indestructible in challenging and windy conditions
- Full-Featured Rainfly: One large StayDry™ door with built-in rain gutter and kickstand vent for extra ventilation
- Tech-Friendly Pockets: Cable ports on all pockets for easy cord management
- Easy Setup & Packing: Unified hub-and-pole system and symmetrical design make setup super quick; ultra-compact stuff sack
- Stargazing Mesh: Leave the fly off and watch the stars through the top mesh window
- Durable Details: Reinforced patches, stitching at guy points and locking anodized stake loop grommets for extra strength
- Includes: Tent body, rainfly, poles, 7 Needle stakes, guy lines, stuff sack, setup instructions
- Gear Shed Available: Sold separately, the MSR Gear Shed turns the Hubba Hubba into a basecamp with expanded vestible space
Compatible with the Universal 1 Person Regular Footprint, sold separatelyEaston® and Syclone™ trademarks are owned by Easton® Technical Products
What is California Proposition 65?
Passed into law by California’s voters in 1986, Prop 65 is intended to help California residents make informed decisions about the products they buy.
The law states that companies selling products in California must display a warning when the product contains one or more of the approximately 800 chemicals known to the state of California to cause cancer and/or reproductive harm.
Why has MSR placed a Proposition 65 label on some of its products?
By placing the Prop 65 warning on a product, MSR acknowledges that it contains one or more of the chemicals on the Prop 65 list, however the listed chemical may be well within the “no significant risk” range. MSR has not evaluated every product but out of caution, we include the warning.
Are consumers who use an MSR product with a Proposition 65 label at risk?
The label simply indicates that the product contains the chemical and because of that, there is a potential for exposure to it.
The California government states: “The fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.” The government explains, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.”
For example, some MSR stoves contain brass. Exposure to brass is not itself harmful. However lead is a component of brass and should the brass be disrupted, a user could potentially come in contact with the lead. While the lead levels fall below the “no significant risk” range, MSR is still required to acknowledge its presence.
To learn more about California’s Prop 65, please visit: https://oehha.ca.gov/proposition-65/general-info/proposition-65-plain-language
What types of chemicals are on the Proposition 65 list?
The Prop 65 list contains a wide range of naturally occurring and synthetic chemicals that are known to California to cause cancer or birth defects or other reproductive harm. They may be additives or ingredients in pesticides, common household products, food, drugs, dyes or solvents. They may be used in manufacturing and construction, or be the byproducts of chemical processes. Proposition 65 requires that the Governor of California maintain and publish a list of these harmful chemicals, and update it annually.
According to the state of California:
A chemical is listed if it has been classified as a reproductive toxicant or carcinogen by an "authoritative" organization on the subject. The U.S. Environmental Protection Agency, U.S. Food and Drug Administration, National Institute for Occupational Safety and Health, the National Toxicology Program, and the International Agency for Research on Cancer are considered authoritative for carcinogens. For reproductive toxicants, appropriate authorities include the U.S. Environmental Protection Agency, U.S. Food and Drug Administration, National Institute for Occupational Safety and Health, and International Agency for Research on Cancer. Chemicals will also be listed if they are required to be labeled or identified as a carcinogen or as a reproductive toxicant by an agency of the state or federal government.
For long-term storage, keep your tent in a dry and cool area, out of direct sunlight. Store it outside of its stuff sack, as you would a sleeping bag, in a breathable, over-sized cotton or mesh duffel for protection. On the cheap, an old pillowcase is ideal.
- Weather Conditions: High humidity, low temperatures, and rainy conditions create the most condensation.
- People: We produce about 1 - 2 pints of moisture per night through breathing and skin evaporation.
- Wet Environment: Wet ground or wet gear stored inside the tent.
To start, the tent body and ceiling are made of breathable and mesh fabrics. This allows moisture to escape the interior of your tent. However, it must also be able to escape the waterproof fly, and every MSR rainfly has a peak vent that provides protection from the outside, while still allowing essential, free-flowing fresh air to move through your tent. You can also leave a door open in good weather, or take advantage of the double sliders on the doors to vent from the top where warm and moist air tends to accumulate. Make sure to leave at least two vents open if possible, allowing any breeze to provide cross-flow ventilation for maximum circulation. Guying out your rainfly will also increase ventilation in hot or humid conditions.
Video: What causes condensation in a tent
At MSR, we voluntarily follow ASTM International F 1934-98 standards around these two tent industry terms. In accordance with this standard, packaged weight includes the total weight of the packaged contents off the shelf. Minimum weight, by comparison, refers to the combined weight of the tent body, rainfly (if applicable) and tent poles, but not any of the other items that may appear in the package, such as tent stakes, guy cords, stuff sack, etc.
Many MSR backpacking tents can be pitched using only the rainfly, poles and footprint, and in our tent specs we call this non-industry standard setup option our Fast & Light weight.
To learn more about packaged weight vs. minimum, and the manufacturing processes that can affect them, check out our blog post on the topic.
Here are a few reasons for those weight variances:
- Coating variances: The thickness in coatings on tent fabric can vary a bit from one tent to another. Fabrics are produced in batches and called “lots,” and there can be a slight weight difference between lots as well as within lots.
- Fabric variances: Because tent fabric is hand cut in up to 200 layers at once, some pieces may be cut just outside the line, making certain parts slightly larger and thus heavier.
- Scale accuracy: At MSR, weights are determined using our calibrated lab scales, which are more accurate than normal household scales.
- Added products: Brands may decide at the last minute to include more stakes or guy cords, which will add to the packaged weight.
If you start to notice leaks along your seams, seam sealing can make them waterproof again, extending the life of your tent. The process can be easier than you might think. We put together this video to help guide you through.
We Believe in What We Build
We know that in the backcountry, reliable gear is critical. That’s why MSR gear has always been engineered to the highest quality standards and rigorously tested before it reaches you.
Seattle Repair Shop
If your MSR gear is in need of repair, our technicians will work to find you a solution as quickly as possible. A majority of the time, MSR products can be repaired.
If you are experiencing an issue that you feel falls under the MSR Limited Warranty, we’re here to help with that too. Please contact our team to get started.