Engineered to meet the needs of professional alpinists, the 4-season Advance Pro™ 2 tent features an ultralight construction and a small footprint for easier pitching on high-altitude ledges. Its extreme-condition, single-wall design utilizes nearly indestructible Easton® Syclone™ Poles and reinforced guy-points. A unique pole sleeve allows the tent to be set up fast by one person standing in a single precarious spot—a critical advantage when space is precious in technical terrain. Proven in harsh environments like the Himalayas, the Advance Pro™ tent delivers reliable protection on aggressive summit assaults.
- Ultralight Strength: Extreme-condition protection at just 1.3 kg (2 lb. 14 oz.).
- Easton® Syclone™ Poles: Ultralight, cutting-edge composite materials resist breaking in severe conditions.
- Small Footprint: For easier pitching on narrow ledges in the high alpine.
- Fast Setup: Hybrid clip and pole sleeve design sets up in seconds with one person so you can get out of the weather quickly.
- Additional Features: Single door; front and rear vents.
- Easton® and Syclone™ trademarks are owned by Easton® Technical Products
|Weight (Standard)||3 lbs 3 oz|
|Length (Standard)||82 in|
|Minimum Weight (Standard)||2 lbs 14 oz|
|Minimum Weight (Metric)||1.30 kg|
|Packed Weight (Standard)||3 lbs 3 oz|
|Packed Weight (Metric)||1.46 kg|
|Floor Area (Standard)||24 sq. ft|
|Floor Area (Metric)||2.2 sq. m|
|Tent Volume (Standard)||38 cu. ft|
|Tent Volume (Metric)||1076 liters|
|Number of Poles||1 Easton|
|Interior Peak Height (Standard)||44 in|
|Interior Peak Height (Metric)||1.12 cm|
|Packed Size (Standard)||18 x 6 in|
|Packed Size (Metric)||46 x 15 cm|
|Number of Doors||1|
|Rainfly Fabric||20D ripstop nylon 2 ply breathable 1000mm|
|Mesh Type||15D nylon micro-mesh|
|Floor Fabric||30D ripstop nylon 3000mm Durashield|
|Country of Origin||Imported|
What defines "waterproof" in a tent and what does the "mm" rating mean?
What do the letters D and T after the fabrics mean?
What are some different configuration of the tarps and wings?
Why should I get a footprint?
How should I store my tent?
For long-term storage, keep your tent in a dry and cool area, out of direct sunlight. Store it outside of its stuff sack, as you would a sleeping bag, in a breathable, over-sized cotton or mesh duffel for protection. On the cheap, an old pillowcase is ideal.
How long will a tent last?
What are packaged and minimum weights?
Many MSR backpacking tents can be pitched using only the rainfly, poles and footprint, and in our tent specs we call this non-industry standard setup option our Fast & Light weight.
To learn more about packaged weight vs. minimum, and the manufacturing processes that can affect them, check out our blog post on the topic.
How do I guy out my tent with the included tensioners?
How do I prevent mildew?
What's the best way to clean my tent?
Do I need to seam seal my tent?
What causes condensation and how do I reduce it in my tent?
- Weather Conditions: High humidity, low temperatures, and rainy conditions create the most condensation.
- People: We produce about 1 - 2 pints of moisture per night through breathing and skin evaporation.
- Wet Environment: Wet ground or wet gear stored inside the tent.
To start, the tent body and ceiling are made of breathable and mesh fabrics. This allows moisture to escape the interior of your tent. However, it must also be able to escape the waterproof fly, and every MSR rainfly has a peak vent that provides protection from the outside, while still allowing essential, free-flowing fresh air to move through your tent. You can also leave a door open in good weather, or take advantage of the double sliders on the doors to vent from the top where warm and moist air tends to accumulate. Make sure to leave at least two vents open if possible, allowing any breeze to provide cross-flow ventilation for maximum circulation. Guying out your rainfly will also increase ventilation in hot or humid conditions.
Video: What causes condensation in a tent